The EZCT S2A is Vanguard’s third-generation, microprocessor-based, current transformer test set. The EZCT S2A can perform the current transformer (CT) excitation, CT current-ratio, and winding polarity tests automatically. The EZCT S2A automatically raises and lowers the excitation test voltage without any operator intervention. With up to 1500 Vac excitation test voltage available, the EZCT S2A can easily perform excitation tests on very large CT’s.

• Perform Saturation, Ratio and Polarity Tests
• Fully Automated
• Comprehensive Graphic and Tabulated Test Reports
• Plot Multiple Saturation Curves
• Store up to 128 CT test plans
• Store up to 10 test definitions in each test plan
• RS-232C and USB computer interfaces
• Built-in 4.5 inch thermal printer
• USB Flash drive interface

EZCT-S2A	Cables
Cable Part Number [8000-0005] USB Cable [ 6' (1.83m) ] 8000-0005 [8000-0006] RS-232C Cable [ 6' (1.83m) ] 8000-0006 [8000-0016] Power + Ground Combination Cable 8000-0016 [8000-0105] H Cable Set (Metal Type) [ 35' (10.67m) ] 8000-0105 [8000-0106] EZCT X Cable Set (Metal Type) [ 20' (6.10m) ] 8000-0106

EZCT-S2A	Technical Specifications
TYPE Portable current transformer test set PHYSICAL SPECIFICATIONS 16.8”W x 12.6”H x 12”D  (42.7 cm x 32 cm x 26.9 cm); Weight: 55 lbs (25 kg) INPUT POWER 100 – 120 Vac or 200 – 240 Vac (factory pre-set), 50 Hz/60 Hz MEASUREMENT METHOD IEC 60044-1, IEC 61869, ANSI/IEEE C57.13.1, and ANSI/IEEE C57.12.90 OUTPUT TEST VOLTAGES 0 – 50 Vac @ 10A max, 0 – 250 Vac @ 10A max 0 – 500 Vac @ 5A max, 0 – 1500 Vac @ 1.2A max VOLTAGE READING RANGE 0 – 2,200 Vac; Accuracy: ±1.0% of reading, ±1 volt CURRENT READING RANGE 0 – 10A; Accuracy: ±1.0% of reading, ±0.02A CURRENT-RATIO RANGE 0.8 – 999: 0.1%, 1000 – 1999: 0.3%, 2000 – 5000: 1% PHASE ANGLE MEASUREMENT 0 - 360 degrees; Accuracy: ±1.0 degree DISPLAY Back-lit LCD Screen (240 x 128 dot graphic; 114mm x 64mm); viewable in bright sunlight and low-light levels PRINTER Built-in 4.5-inch wide thermal printer COMPUTER INTERFACES One RS-232C port (115k baud), one USB port EXTERNAL DATA STORAGE One USB Flash drive interface port (Flash drive not included) PC SOFTWARE Windows? XP/Vista-based CT Analysis software is included with purchase price INTERNAL TEST RECORD STORAGE Stores 140 test records. Each test record may contain up to 10 sets of excitation and ratio data INTERNAL TEST PLAN STORAGE Stores 128 test plans. Each test plan can store 10 excitation test voltage and current settings SAFETY Designed to meet UL 61010A-1 and CAN/CSA C22.2 No. 1010.1-92  standards ENVIRONMENT Operating: -10? to 50? C (15?F to +122? F); Storage: -30? C to 70? C (-22?F to +158? F) CABLES Two 20-foot X cable sets, One 35-foot H cable set, power cord, One cable-carrying duffel bag WARRANTY One year on parts and labor Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).