发射功率25W,可手动选择低至1W。
发射音频谐波失真≤10%。
音频响应+1/-3dB of +6dB/octave。
交流噪声≤-40dB
频偏最大±5KHz。
寄生辐射≤0.25μW。
电流消耗:25W时5A。
Transmitter section
Transmission power 25W, you can manually select as low as 1W.
Transmission audio harmonic distortion ≤10%.
Audio Response +1/-3dB of +6dB/octave.
AC Noise ≤-40dB
The maximum deviation± 5KHz.
Parasitic radiation ≤0.25μW.
When current consumption 25W 5A.
Frequency range: 156.025MHz~--163.275MHz.
The first IF 21.7MHz, the second IF 450KHz.
Noise by 20dB when the maximum available for the sensitivity of≤0.4μV.
Adjacent Channel Selectivity ≥70dB.
Spurious response suppression ≥70dB.
Intermodulation suppression ≥68dB.
Spurious emission suppression ≤2nW.
Maximum current consumption of the audio output 0.9A; standby 0.3A.
Audio response +1/-3dB of +6dB/octave.
AC Noise ≤-40dB.
10% audio distortion when the output power of built-in speaker 2W, external speaker 3.5W.
Continuous duty to 70 channels.
Receiving frequency 156.525MHz.
Receive mode 16K0G2B.
Yu-character error rate of 10-2, the maximum usable sensitivity≤0.6μv.
The first IF 17.9MHz, the second IF 455KHz.
Adjacent Channel Selectivity≥70dB.
Spurious response suppression≥70dB.
Intermodulation suppression≥68dB.
Spurious emission suppression≤2nW.
HX2010 meet lTU-RM.493-13 on DSC system requirements.
DSC can encode and decode messages.
DSC can manually write the message content.
Can store 20 calls from the identification number (MMSI) and contact name.
Automatically into the calibration of the DSC message.