英国进口MWA工模具焊条MAC TOOL E3062|E Fe4|59-62 HRC|高速钢焊接

Hard facing electrode, designed to deposit high quality high speed steel on mild or low alloy steels, having a metal recovery rate of 115%. Tough and highly crack resistant deposits, retaining hardness at temperatures up to 620oC. Deposits can be annealed and re-hardened by oil quenching. Highly recommended for the fabrication of blanking and piercing dies, knife blade edges, shear blades, lathe tools, boring tools, milling cutters, broaching tools, drills, hot working dies etc., ideal for the building up of edges on small components.

E3062硬面耐磨堆焊焊条，适用于在低碳钢或低合金钢上熔敷高质量高速钢，熔敷效率高，金属回收率为115%。坚固的高抗裂熔敷层，在620℃以下仍保持硬度。熔敷金属可以通过油淬进行退火和再硬化。强烈推荐用于冲裁和冲孔模、刀刃、剪切刀片、车刀、镗刀、铣刀、拉刀、钻头、热作模具的制造，非常适合小部件边缘的堆焊。

Typical All Weld Metal Chemical Analysis (%)

典型全焊缝金属成分 (%)

Typical All Weld Deposit Hardness

典型全焊缝熔敷金属硬度：

As Depostied 熔敷后： 59-62 HRC

Annealed@865°C退火@865°C： 35-37 HRC

Oil Quenched@1200°C油淬@1200°C： 59-62 HRC

Sizes Available and Recommended Amperages

尺寸Φ/电流：

Current电流：AC/DC (+)

Related Specification参考标准：EN 14700 E Fe4

Storage储存：Electrodes should be stored in dry conditions. Should the electrodes  become damp, re-dry for one hour at 150°C before use. 焊条应储存在干燥环境中。如果焊条受潮，应在150°C下重新干燥1小时后再使用。