| 详细介绍：
TM-6710CL / RM-6710CL
-
1/2” progressive scan interline transfer CCD imager 648(H) x 484(V)
-
120/60 Hz selectable frame rate
-
Up to 300 fps in partial scan modes
-
Full frame shutter, 1/60 to 1/32,000 sec.
-
Asynchronous reset with external shutter control
-
8-bit x 2 (or 8-bit x 1) digital Camera Link output
|
The TM-6710CL is a high resolution monochrome camera with non-interlaced quad-speed scanning (120 fps) and partial scanning capabilities of 200 and 100 lines. Since the quad-speed mode is standard, images can be displayed on a multi-sync monitor
The signal is analog progressive scan (484 lines), while the output is Camera Link. The full frame electronic shutter with asynchronous reset permits shutter speeds to 1/32,000 sec. The shutter function works in all scanning modes. The camera features 9.0 μm square pixels, providing excellent image definition in all orientations.
Optional features include AGC enable, internal IR cut filter, gamma adjust to 0.45, and remote imagers.
Dimensions (H x W x L): 40 x 46 x 128 mm
TM-6760CL / RM-6760CL
-
648(H) x 484(V) with 60/30 fps selectable
-
Digital output and analog output
-
Full frame integration, two-row binning (648 x 242 pixels) at 120 fps
-
Partial scan (200 lines, 120 fps)
-
Full-frame shutter to 1/32,000 sec.
-
Asynchronous reset, no-delay shutter
|
The TM-6760CL is a miniature, VGA monochrome progressive scan CCD camera. Based on a high-quality Kodak 1/2” progressive scan image sensor (KAI-0330), this camera offers excellent price performance with a plenty of flexibility. It has a selectable frame rate of 60 or 30 fps, but can provide full frame integration at 120 fps using two-row binning. 200-line partial scanning is also possible at 120 fps. The TM-6760CL has a substrate drain-type shutter mechanism which provides a superb picture at various speeds without smearing.
The camera provides both analog output and 8-bit Camera Link digital output. Camera control is provided via a user-friendly GUI (graphical user interface) or by means of serial commands. The control software includes a patent-pending built-in look-up table (LUT) for maximum control over dynamic range.
The camera’s flexible features make it suitable for a wide range of applications including machine vision, medical imaging, intelligent transportation systems, robotics, gauging, character recognition, and surveillance.
Note: This camera is also available with an RS-644/LVDS interface (Part number TM-6760). Customers needing to use the analog output capabilities of the TM-6760 while controlling the camera via RS-232C serial commands must order the LVDS model. For more information on the specific features of the LVDS model, including shutter control and back panel connections, please use the link at the right side of this page to download the TM-6760 Series user manual.
Dimensions (H x W x L): 44 x 44 x 63 mm
TM-1020-15CL
-
1008(H) x 1018(V) resolution @ 15 fps
-
9.0 μm square pixels with full frame integration for long exposures
-
Compact housing with high-rel connector
-
Full-frame shutter to 1/16,000 sec.
-
Asynchronous reset, no-delay shutter
-
Read-out-inhibit control for multiple-camera applications
|
TM-1040
-
High resolution 1” progressive scan CCD
-
10-bit digital output (RS-644)
-
RS-170/RS-343A converted analog output
-
30 frames per sec. @ 1008 x 1018
-
Asynchronous reset with external shutter control
-
Frame memory built-in for async image capturing
-
Full frame integration with uninterrupted video
-
RS-232 ext control for all camera parameters
|
TM-1325CL / RM-1325CL
-
1392(H) x 1040(V) @ 30 fps or 15 fps selectable
-
Full frame integration for long exposures
-
Image center partial scan (500, 250 lines)
-
Full-frame shutter to 1/16,000 sec.
-
Asynchronous reset, no-delay shutter
-
Near IR sensitivity and high gain CCD output
|
The TM-1325CL is a compact, high-resolution (1.4 megapixels) monochrome progressive scan CCD camera. The camera's 2/3" sensor (ICX285AL) offers a wide dynamic range with high sensitivity over both visible and near IR portions of the spectrum, making it well suited to applications involving widely varying light conditions, specialized targeting, or inspection of blemishes or defects not easily observed in the visible spectrum. The interline transfer CCD permits full vertical and horizontal resolution of high-speed shuttered images. The TM-1325CL has a selectable frame rate of 15 or 30 fps, and has a substrate drain-type shutter mechanism which provides a superb picture at various speeds without smearing.
The TM-1325CL has a patent-pending, built-in look-up table (LUT) and automatic dual channel compensation. This provides fast 10-bit to 8-bit pre-processing for effective image feature enhancement. The camera has both analog (multiplexed to single channel output) and Camera Link digital output for interfacing with frame grabbers.
Note: This camera is also available with an RS-644/LVDS interface (Part number TM-1325). Customers needing to use the analog output capabilities of the TM-1325 while controlling the camera via RS-232C serial commands must order the LVDS model. For more information on the specific features of the LVDS model, including shutter control and back panel connections, please use the link at the right side of this page to download the TM-1325 Series manual.
Dimensions (H x W x L): 44 x 44 x 63 mm
|
放大图片
暂无相关下载
