RMC-2040GE / TMC-2040GE

The RMC-2040GE is a compact, high-resolution (2 Megapixels) color progressive scan CCD camera with a dual-tap front-end, automatic channel balancing, GigE Vision digital output, and a high frame rate of 34 fps at 1600 x 1200 resolution. A single-tap mode at 17 fps is user selectable. The RMC-2040GE features the Kodak KAI-2020 1" CCD imager with a Bayer color filter array for host-based color interpolation.
The RMC-2040GE delivers an outstanding signal-to-noise ratio of >58 dB in typical operation. A high performance front-end provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). Other features include image center partial scanning (600, 300, or 150 lines), user-definable variable partial scanning (any number of lines with any starting point), defective pixel compensation, and a PIV mode.

The RMC-2040GE is supported by JAI's easy-to-use SDK and Control Tool software, offering straightforward setup and full GigE Vision and GenICam compliance. The camera also integrates smoothly with a variety of third-party GigE Vision software libraries and development tools. 
An optional configuration is available for customers requiring backwards compatibility with Pleora's iPORT GigE firmware engine. Click here to access software and documentation for this option.

For the monochrome version of this camera, click here.

Dimensions (H x W x L): 51 x 51 x 85 mm