详细介绍: 用于高温,高压阀门,剪切刀刃,锯齿,螺旋推杆等。
钴基焊条
Trade- Mark 牌 号 |
Equivalent to China Standard 相当国标 |
Characteristics & application 特性和用途 |
Equivalent to AWS 相当AWS |
D 802 |
EDCoCr-A-03 |
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter. HRc38-47,耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃 |
ECoCr-A |
D 812 |
EDCoCr-B-03 |
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve. HRc45-50,耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀 |
ECoCr-B |
D 822 |
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler. HRc≥53,耐热、耐磨,但抗冲击性差。堆焊锅炉旋转叶轮 |
|
D 832 |
EDCoCr-C-03 |
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way. HRc≥50,耐热、耐磨。堆焊高温工件如热轧导轨 |
ECoCr-C |
D 842 |
EDCoCr-D-03 |
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die. HRc28-38,耐蚀、抗热疲劳,具有加工硬化性。堆焊热锻模 |
|
D802钴铬钨合金焊芯的钴基堆焊焊条,采用直流反接,堆焊金属在650℃工作仍能保持良好的耐磨性和耐腐蚀性,用于要求在650℃左右工作仍能保持良好的耐磨性和耐腐蚀性的场合,或承受冲击和冷热交错的部位,如堆焊高温高压阀门及热剪切刀刃等。 熔敷金属化学成分/% C-0.70~1.40 Si≤2.0 Mn≤2.0 Cr-25.0~32.0 Fe≤4.0 W-3.0~6.0 其他≤4.0 Co-余量 堆焊层硬度HRC≥40
D812钴基堆焊焊条 D812钴铬钨合金焊芯的钴基堆焊焊条,采用直流反接,堆焊金属在650℃工作仍能保持良好的耐磨性和耐蚀性,用于高温高压阀门、高压泵的轴套筒和内衬套筒以及化钎设备的斩刀刃口等 熔敷金属化学成分/% C-1.00~1.70 Si≤2.00 Mn≤2.00 Cr-25.0~32.0 Fe≤5.0 W-7.0~10.0 其他≤4.0 Co-余量 堆焊层硬度HRC≥44
|