当前位置：首页 >> 产品展示 >> 电线电缆 >> 橡套电缆 >>矿用屏蔽控制电缆（MKVVP电缆）、、
矿用屏蔽控制电缆（MKVVP电缆）、、放大图片

产品价格：0   元(人民币)
上架日期：2012年9月3日
产地：河北廊坊
发货地：大城  (发货期：当天内发货)
供应数量：不限
最少起订：1米
浏览量：277
  暂无相关下载
其他资料下载：

         
天津市电缆总厂第一分厂

点击这里给我发消息
  详细说明  
品牌：小猫产地：河北廊坊
价格：0人民币/米规格：完善

简要说明：矿用屏蔽控制电缆（MKVVP电缆）、、

详细介绍：

 
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV二芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV三芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV四芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV五芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、单芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、二芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、三芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、四芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、五芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV二芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV三芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV四芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV五芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、单芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、二芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、三芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、四芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、五芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV二芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV三芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV四芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV五芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、单芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、二芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、三芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、四芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、五芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV二芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV三芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV四芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV五芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、4+1芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、单芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、二芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、三芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、四芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、五芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+1芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
·0.6/1kV、3+2芯钢带铠装耐火电力电缆（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.

本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
矿用屏蔽控制电缆（MKVVP电缆）、、
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.

本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产，同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
适用范围
本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工频额定电压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·电缆导体的最高允许长期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（最长持续时间不超过5s）电缆导体最高允许温度
PVC:导体截面≤300mm2-160℃
导体截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·电缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·电缆的弯曲半径：多芯电缆不小于电缆外径15倍，单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
 
电缆的型号Type of cable
　
　
结构尺寸及主要技术参数Construction and main technical data
·0.6/1kV单芯耐火电力电缆（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示导体为紧压圆形线芯。
Where：*=Compact circular stranded conductor.
公司全称：天津市电缆总厂橡塑电缆厂

生产厂区：河北省大城县刘演马工业区
  
电  话 ：0316-3267066 

手  机 ：18231608566

传  真 ：0316-3267058

组织机构代码证：10951028-2

CCC认 证 编 号：2003010104099693

营业执照注册号：131025100000860

税 务 登 记 证：131025109510282

开  户  银  行：河北省大城县刘固献农村信用合作社

汇  款  帐  号：91608040020110005316


 
该公司其他信息
最新供求信息 企业产品推荐

暂无产品
　 在线询盘/留言 请仔细填写准确及时的联系到你!  
您的姓名：
*　预计需求数量： *
联系手机：
* 　移动电话或传真：
电子邮件：
*　所在单位：
咨询内容：
*
           您要求厂家给您提供：
  • 规格，型号
  • 价格及付款条件
  • 产品目录
  • 最低订货量
  • 运送资料
  • 提供样本
  • 库存情况
  • 包装材料